Google Search

Google

Friday, May 30, 2008

Farewell report: Proton MPi Iswara 1.5i(A)


My Proton MPI Iswara 1.5i(A) UK-spec 1995/95. It's different from LOCAL Iswara. It came with original 4G15 Injection engine, Original Lancer Fiore dashboard (will explain why later), Lancer Fuel tank, fuel pump, fuel cap (Hard to find the fuel pump (back in 2001), gotta find Lancer), Nippondenso air-cond (Not Proton air), Slightly thicker body shell (more solid) etc...

Q:Why the title "Farewell report"?
A: It's because I'm selling off this car. RM7800 Ono only. CASH BUYER ONLY! If cash, price can negotiate further. What's need to be done, just some touch up on the paint work and rear foglights (mine's stolen early this year).


I'm the 2nd owner of this car having owned the car since 2000. I bought the car for RM32,000 on March 2000 with 114,000km on the clock. Over the past 8 years, I clocked 104,000km (Averaged 13000km per year). Total mileage now: 218,000km.


Without further ado, let’s proceed to my brief write up on this car.


Interior:




The interior’s TOUGH. The seats are Hardy PU & cloth covered coconut husk. The dashboard’s taken from Mitsubishi Lancer Fiore. Why? It’s because back in 1989, the Saga failed the UK Basic crash test as the dashboard collapsed and crushed the legs of the driver. To pass the test, Proton used original Lancer Fiore dashboard and the car finally passed the basic crash test. Words can’t describe the interior, I will now present you the photos.




Engine:

The engine is tried and tested 4G15 “Megavalve” 12 valve engine but with added twist. It came originally with Multi-point Fuel Injection engine with “ECI-MULTI” embossed on the ECU (see picture). The output is 67Kw JIS (91hp) @6000rpm, torque is 126Nm@3500rpm. Generally, it’s quite reliable, except my car’s Throttle body was changed 3 times as it failed to function. It’s not cheap AND RARE at RM800-900 for a new part.
The engine, believe it or not is smooth and quiet (till 130km/h). I swore by it. Don’t believe, call/E-mail me to test drive my car. Apart from the Throttle body, it requires little maintenance and is a Workhorse. As it’s mated with 3 speed automatic with high gearing, the performance’s weak (see “performance” later) and the Noise will crept into the engine from 130 km/h onwards.

Ride and handling:

The car came with Front MacPherson struts, I-arms, antiroll bar coil springs and dampers. The rear suspension’s outdated and inflexible U-shaped trailing arms, coil springs and dampers.

My Iswara started off (1st year owning the car) with soft suspension (nosedived when braked hard), severe bodyroll and understeered easily (80km/h). The “Trailing arms” rear suspension makes things worse. How I solve this problem?

Firstly, I changed all the Shock absorbers to Monroe® Sensatracs. Next, I installed HOTBITS Lower Suspension Tie-Bar. This followed by Anti-roll bar PU Bushings. Finally, I upgraded the rims & tyres to 14” and added “Spacer” to the rear wheels. The end result? SUPERB handling (but RIDE a bit HARD) and now tolerates understeer up to 120km/h. Little bodyroll, No more nose-diving.

The Iswara out-cornered many cars such as TOYOTA VIOS, Altis, Camry 2.4, Honda City IDSI, Toyota Hilux, Perodua Myvi in Tropicana to Damansara Indah road (that twisty corner rulez). It also can keep up with Proton Waja (side by side or 1 car length behind until Casa Indah traffic light), Honda Civic EK VTEC (CKD stock), Perodua Kelisa, Toyota Estima, and Mercedes E230. This regularly occurred until 3 weeks ago, I gave up my leaking Monroe Sensatracs & installed Kayaba Shocks (front Oil, rear gas) which trade-off the handling with better RIDE.

The brakes, though rear’s drum is pretty good especially the front when fitted with good brake pads such as Bendix Metalking. Of course it’ll lock at hard hard braking as it does not have ABS.

Performance:

The car being a 3 Speed Auto, was underpowered. 0-100km/h around 13.6 seconds though 0-70km/h (traffic light start) was quite fast at 6.4 seconds – a bit torquey (126Nm of torque @ 3500rpm). Top speed: 165km/h @ 5300rpm (Redline 6000rpm). Anything above 130km/h = NOISY and slightly unstable.

Fuel economy:

The fuel consumption’s CRAP. Full tank’s (45 litres) only good for 290km town driving. 380km Highway driving. This started in 2001, few months after I changed the fuel pump. My fuel consumption got worse. Is it because it’s taken from Late 80s Lancer Fiore (ie. Old)? To Next owner: If you want better fuel consumption, you have 2 options, Either changed the Fuel Pump or Convert to NGV.

Wheels and tyres:

The Iswara came with 175/70R13 and fitted with 5 spoke 13” JRD Rims. The PCD is 114.3 four holes, 5Jx13”. I used the stock tyres and rims for 2 years. In 2002, I upgraded it to 185/60R14 with 14” Japanese alloy rims (KOSEI Laufer).


Transmission: 3 speed automatic gearbox
1st: 2.846
2nd: 1.581
3rd: 1.000
Rev: 2.176
Final drive: 3.600

Dimension and weights:

Length: 4260mm
Width: 1630mm
Height: 1360mm
Wheelbase: 2380mm
Weight: 895kg
Boot space: 370litres
Turning circle: 9.4m



Lastly, to cap it off, here’s the Major parts I changed:

2000:


- Kenwood RDS Cassette player + CD-Changer (RM1300 - June 2000)
- K&N Air filter (RM460 - Speedworks) (July 2000)
- 4 new tyres (Michelin) 175/70R13 (RM600 - ripped off) (March 2000)
- Timing belt, fan belt, spark plug, front brake pad. (RM -NA-) => July 2000
- tinting (SunGard and RIKEN (Front windscreen) - RM560 (August 2000)
- MONROE Sensatracs (Front and back) - RM510 + workmanship) - Sept 2000)
- Fuel Pump (Used Lancer) - RM340, Sept 2000
- Rockford Amp, RCA Cable (RM300) - Sept 2000
- Taiwan Amp 600W, Mohawk Front speakers + tweeters, RCA Cable (RM800) - Aug 2000

- 2 oil change (service)
- Changed bumper, knock right mudgard (hit by motorcycle)
- New Battery (NS70)

2001:
- HOTBITS Lower suspension Tie bar (RM200)
- PU Anti-roll bar Bushings by CARMANIA (RM120) - April 2001
- Rear wheel bearing
- Power window relay (RM120)
- Bendix Metalking brake pad
- 2x oil change
- Enforcer Security system. (After my car was broken into & money, roadtax stolen)
- Changed the Throttle body (RM800)
- Changed Engine Mounting (1 set, SET TULEN)

2002:

- 14" Rims (used KOSEI Laufer RM380) and tyres (RM660)
- New Battery NS70 Maintenence free
- 1x oil change – Changed spark plugs
- Lowered the car with OMP Springs.
- Changed front bumper – soft brushed at the side with another car, bumper dropped.

2003:
- Fixed the Roof (Rust blisters) - Anti-rust, respray)
- Front tyres (14" Goodyear Ducaro GA)
- Monroe Sensatrac (Rear) + Camber
- 2x oil change
- Removed the OMP Springs (Not comfortable, too hard)

2004:
- Monroe Sensatrac (Front)
- Radiator Fan Motor and switch
- 2x oil change (Changed spark plugs)
- Changed the throttle body (RM850)
- Changed Timing belt (184,600km)

2005:
- Goodyear Ducaro GA tyres 14" 2x)
- Bendix Metalking Brake pad
- Timing belt
- New Battery (NS70)
- Rear wheel bearing
- Radiator fan switch, top & lower pipe
- 2x oil change
- Camber

2006:
- Monroe Sensatrac (front) (197,000km)
- NEW Maintenance free battery (NS70)
- 2x oil change, changed spark plugs
- New Front Bumper (Hit kerb)
- Changed the Throttle body (RM900)
- Monroe Sensatrac (rear)

2007:
- New tyres (Dunlop 185/60R14) 2x + Camber
- 2x oil change
- Changed Trestor fr Brake pads, brake hose, changed whole rear brake shoes.


2008:
- New absorbers (Kayaba – Front Oil, rear Gas), driveshafts, Bushings
- Removed Kenwood RDS Headunit + CD Changer, 2 amp, RCA Cable, install Sony Cassette Headunit
- Rear foglights stolen (Cannot find replacement in Accessories shop) AND Looking for Original Air filter set to replace the K&N. The car will be even SMOOTHER and QUIETER with original air filter (Cannot find replacements in Chop shops).


THAT”S ALL FOLKS. Thanks for having the patience to read it.

7 comments:

  1. Hi,

    Such a great article and can't believe your affort to detail out about iswara uk sepc, it does need a great appreciation. I've the same model as yours and loved very much. 5890 is the number...any idea what it means?

    anyway, I'm the second owner bought in 2002 with today mileage recorded around 230,000km. Now are the problems.... engine need major overhaul...got asap putih spraying from exhaust, throttle-body, then gear box where the car seem not moving on 1st gear until I need to press a bit harder so then it starts move. Next, not quite sure about the computer box spare part, I heard its quite expensive... in short I know it is expensive to maintain... what is the best engine to replace complete with gear box..so I go for 4g93 or any the same series 4g15 which are lot out there but not sure how to get one... appreciate your suggestion thanks min

    ReplyDelete
  2. Thanks for your comment... Firstly, your No plate means "i) "Not (5) Rich (8), Play (9) Beautiful (0) or Zero", ii) "Not (5) Rich (8) Dog (9) Beautiful (0) or Zero".

    As for the maintenence, I agree it's always higher than NORMAL Iswara, especially the ECU (Computer BOX) and throttle body (mine replaced 3 times). The last replacement is RM900 (NEW, part).

    About the "Asap putih" case, you just need a TOP OVERHAUL (I was quoted RM750 +/- incl workmanship).

    The gearbox by right is a TOUGH 3 speed Auto. My Iswara NEVER HAD GEARBOX PROBLEM. 1995 to 2008 (sold at August 2008) ORIGINAL Gearbox! It depends on how you drive. Very Cheap recond gearbox @ Kereta Potong )(Make sure pay below RM1000).

    If you REALLY want to replace Engine PLUG AND PLAY (drop in) without any Mounting modification. Here's the options (only Engine A to D is plug and play):

    Engine A: Mitsubishi 1.6 4G61 Manual (125hp) or 4G61T Manual (160hp Turbo) from Mirage/Lancer (1987 to 1991). Price RM3000 1/2 cut for 4G61T (back in 2007)

    Engine B: Mitsubishi 1.8 DOHC -NA- 4G67 Manual 140hp also from 1987 to 1991 Mitsubishi Mirage. (Price unknown as very RARE)

    Engine C: Same engine as your current car. 4G15 Injection. From either UK-spec Iswara (92 to 98) or 1996 to 2001 Lancer MX. This combo is the cheapest, Engine and gearbox 1 set => RM1500 +/- only.

    Engine D: I don't think JPJ will approve this engine anymore as it's 2000cc, 4G63T manual VR4 turbo engine. Now 1/2 cut cheap: RM2500 below only as the engine is already old (1987 to 1992).

    Engine E: Mitsubishi 4G91 from Lancer 1992 to 1996 (Wira body). 115hp 1.5cc DOHC Injection. But need to "modify engine mounting a bit". Price Unknown. Anyone can help?

    Engine F and G ALSO need Modify Engine mounting:
    E: 4G93/4G93P (Proton)/4G93T manual (turbo) 1.8cc DOHC.

    Price varies, depending whether it's PROTON (Eg. Putra, Satria GTI, Wira 1.8 DOHC) or Mitsubishi Colt or Lancer Engine, NA or TURBO.

    F: 4G92/4G92P 1.6 Injection. Wira engine

    HAPPY HUNTING...

    ReplyDelete
  3. Hello from UK,

    I need urgently to buy the Fiore digital meter set.

    Please contact me to let me know if you can supply. I need a price including shipping to UK.

    e-mail me on m.ali@tasc.ac.uk

    Thanks
    Muhammad

    By the way, I have EXACTLY the same car as that here in UK. Even the same colour. That model is known as 1.5SL Auto. Here the throttle body is easy to find as all Proton and Mitsubishi Colt and Lancer all have that ECI-Multi system from 1992 onwards.

    ReplyDelete
  4. A Retractable Gate is ideal for homes or commercial areas that require medium security levels. They are ideal to provide utmost security and strength as they are generally made of galvanized steel. They are designed in a way that light and fresh air can come in without compromising on the security or letting intruders in and have multiple locking options.

    ReplyDelete
  5. Anonymous9:05 PM

    Bro i need proton saga uk spec signal switch can u please email me at ishiwnder11@hotmail.com

    ReplyDelete
  6. Attention

    Sir/Madam.
    Mega Loan Offer!!!

    We offer loan from a minimum amount of 50,000.00 to 20 million Euros,Dollars & Pound-sterling at REBECCA WILLIAMS LOAN FIRM. Are you looking for loans for all kind of purpose,a Business Loan, Personal Loans, Mortgages, Car Loans, Debt Consolidation Loans, Unsecured Loans, Risk capital, etc. ..

    You are well-come in the right place Your loan solutions! I am a private lender who lends Individuals and Businesses at a low interest rate and affordable Interest rate of 2%.

    *If you are very serious as I am,we will have this transaction concluded with 7 Banking Working days from the date of start. We have Branches and Clearing Houses in some countries like:Turkey Branch,United Kingdom Branch,United States Branch,Japan Branch, Indonesia Branch and South Africa and others,

    NOTE: 1 year minimum and 20 years maximum depending on the loan amount you need. Customers should be above the age of 35 This loan transaction is
    100% guarantee for serious customers.

    Contact Email: rebeccawilliamsloanfirm@gmail.com

    Thank you.

    ReplyDelete
  7. A person necessarily assist to make seriously articles I’d state.
    That is the first time I frequented your web page and thus far?

    my web page; 강남오피
    (jk)


    ReplyDelete